F-104G/J ‘Belly-mounted Sidewinders’ Conversion set
This set of injection-moulded conversion (differential) parts contains 5 parts. For modeller’s convenience a display base, made of pasteboard card, depicting tarmac section of the military airport is added. A comprehensive instruction leaflet and a decal sheet are included.
Colour schemes included in the kit:
1) Lockheed (Messerschmitt-built) F-104G Starfighter, c/n 683D-7054, Black 21+85, WTD 61 (Wehrtechnische Dienstelle, Bundeswehr Technical and Airworthiness Centre for Aircraft), Federal German Air Force (Luftwaffe), Manching Air Base, West Germany, 1966-85
2) Lockheed (Mitsubishi-built) F-104J Starfighter, s/n 36-8528 (c/n 683B-3028), Black 528/36-8528, No.202 FIS (Fighter Interceptor Squadron, Hikōtai), No.5 Air Wing (Kōkūdan), JASDF (Japan Air Self-Defense Force, Kōkūjieitai), Nyutabaru Air Base, Japan, 1981-82
3) Lockheed (Canadair-built) F-104G Starfighter, s/n 63-13647 (c/n 683D-6096), Black R-647, Eskadrille 726 (Squadron), Royal Danish Air Force (Kongelige Danske Flyvevåbnet, KDF), Ålborg Air Base, Denmark, 1965-69
Hunter T.7 (RAF) Conversion Set
Two conversion sets (injection-moulded parts) are included, each containing 14 parts and one clear part (the cockpit canopy).
For modeller’s convenience a display base, made of pasteboard card, depicting tarmac section of the military airport is added.
A comprehensive instruction leaflet and a decal sheet are included.
Colour schemes included in the kit:
1) Hawker Hunter T Mk.7, XL620, No.66 Sq., RAF, Acklington Air Base, Northumberland, U.K., 1960
2A) Hawker Hunter T Mk.7, WV372/R, No.2 Sq., RAF (Royal Air Force Germany, RAFG), Gütersloh Air Base, West Germany, 1967-69
2B) Hawker Hunter T Mk.7, G-BXFI, painted as WV372/R of No.2 Sq., Fox-One Ltd., Kemble Air Base/Cotswold Airport, Gloucestershire, U.K., 2001-11
3) Hawker Hunter T Mk.7, XL619, White 77, No.45 Sq., RAF, Wittering Air Base, Cambridgeshire, U.K., acting as an umpire a/c during ‘Exercise Big Click 74ʼ, Leck Air Base, West Germany, August/September 1974
4) Hawker Hunter T Mk.7, XL612, ‘Raspberry Ripple’, Empire Test Pilotsʼ School (ETPS), Royal Aircraft Establishment (RAE), Boscombe Down Air Base, Wiltshire, U.K., 1970-2001
MOSQUITO - Seatbelts 1/144 - 144005
New HGW printed decals for 1/144 scale models.
The decals are printed using a special technology that allows them to be transferred from the backing paper without a carrier lacquer. Simply wet the decals with clean water, peel them off the backing paper, and apply them to the pilot's seat. And you're done.
The thickness of the decals is proportional to the 1/144 scale.
Armstrong Withworth METEOR NF.11 / NATO Users
Plastic Model kit - 38 plastic parts, 1 clear plastic canopy, canopy mask, decal sheet for two color variants.
Night Fighter variant with airborne interception (AI) radar designed and built by Armstrong Whitworth, three prototypes followed by 311 production aircraft for the Royal Air Force and 20 for the Royal Danish Air Force.
Armstrong Withworth METEOR NF.13 / Killers of the Middle East
Plastic Model kit - 38 plastic parts, 1 clear plastic canopy, canopy mask, decal sheet for two color variants.
"Tropicalised" version of the NF.11 to replace the Mosquito NF.36 for service with 39 Squadron in Malta and Cyprus and 219 Squadron based in Egypt.
Luxembourg Army Aviation Insignia
Decal sheets containing national insignia and/or tricolour stripes, and/or serial numbers/letters and/or various symbols and inscriptions in 1:144th scale. Due to their generic nature they can also be used for other scales (1:72, 1:87, 1:100 etc.).
Two sheets of decals are included in this set.
Detailed product specification:
- insignia diameters: 800,1000 mm
scale diameters: 5.6;6.9 mm
Westland Wapiti Mk.IIA ‘RAF Service’
This full resin kit contains 134 parts, including 59 hardened black resin parts (undercarriage, struts and various details), vacform windshield (a spare set is included for modeller’s convenience) and a comprehensive decal sheet.
Colour schemes included in the kit:
1) Westland Wapiti Mk.IIA, K1291, No.27 Sq., Kohat airfield, India, 1936
2) Westland Wapiti Mk.IIA, J9403, No.30 Sq., Mosul airfield, Iraq, 1929
3) Westland Wapiti Mk.IIA, K1336, No.607 (County of Durham) Sq. (RAuxAF), Usworth airfield, Durham, U.K., 1935
4) Westland Wapiti Mk.IIA, J9388, No.31 Sq., Quetta airfield, India, 1931-32
5) Westland Wapiti Mk.IIA, K1342, No.601 (County of London) Sq. (RAuxAF), Hendon airfield, London, U.K., 1932
Messerschmitt Bf 109K-4 ‘Konrad’
Two injection-moulded kits are supplied in this box and each kit contains 27 parts and one clear part (the cockpit canopy). A comprehensive instruction leaflet and a decal sheet are included. The rear side of the box now comprises the representation of a tarmac section of a military airfield which can be cut out and used as a display base for the assembled model.
NOTE: these kits were re-designed and new masters were made. The cockpit canopies were 3D designed and made by injection moulding into a metal mould.
Colour schemes included in the kit:
1) Messerschmitt Bf 109K-4, Black 265 (W.Nr. 334265), 1./JG 77, Luftwaffe, Amberg-Schafhof airfield, Germany, April 1945
2) Messerschmitt Bf 109K-4, Blue 16, (W.Nr. 331xxx), 12./JG 27, Luftwaffe, Germany, spring 1945
3) Messerschmitt Bf 109K-4, Black 4 (W.Nr. 332529), Stab JG 52, Luftwaffe, Deutsch Brod airfield, Bohemia-Moravia Protectorate, May 1945
4) Messerschmitt Bf 109K-4, Yellow 2 (W.Nr. unknown), 11./JG 3, Luftwaffe, Pasewalk airfield, Germany, March 1945
F-16 in service: BE, NL, DK, NO
Decal sheets containing national insignia and/or tricolour stripes and/or serial numbers/letters in 1:144th scale. These decals are specifically designed for particular aircraft types and to match existing model kits.
One sheet of decals is included in this set.
Decals for the following aircraft are included:
- F-16AM Fighting Falcon (Fokker-built), J-055, s/n 86-0055 (c/n 6D-138, Block 20 MLU), No. 313 Sq., scheme for ‘Tiger Meet 2010’, Royal Netherlands Air Force, Volkel Air Base, the Netherlands, 2010
- F-16AM Fighting Falcon (SABCA-built), FA-95, s/n 80-3586 (c/n 6H-95, Block 20 MLU), No. 349 Sq., commemorating the first F-16 to be phased out after 8,000 flight hours, Belgian Air Force, Kleine Brogel Air Base, Belgium, 2023
- F-16AM Fighting Falcon (SABCA-built), E-194, s/n 78-0194 (c/n 6F-21, Block 20 MLU), No. 727 Sq., celebratory colour scheme for 60 years of the RDAF, Royal Danish Air Force, Skrydstrup Air Base, Denmark, 2010
- F-16A Fighting Falcon (Fokker-built), 289, s/n 78-0289 (c/n 6K-18, Block 10), No. 338 Sq., highlighting the unit assignment to the NATO Rapid Reaction Force, Royal Norwegian Air Force, Ørland Air Base, Norway, 1995
These decals were designed to be used with 1:144 Revell kits.
Tornado F.2/F.3 in RAF DMF7209
Decal sheets containing national insignia and/or tricolour stripes and/or serial numbers/letters in 1:72nd scale. These decals are specifically designed for particular aircraft types and to match existing model kits.
One sheet of decals is included in this set.
Decals for the following aircraft are included:
- Tornado F.2(T), ZD903/AB, No.229 Operational Conversion Unit, Royal Air Force, Coningsby Air Base, 1985-86
- Tornado F.3, ZE737/CE, No.5 Sq., Royal Air Force, Coningsby Air Base, 1989
- Tornado F.3, ZE809/EZ, No.23 Sq., Royal Air Force, Leeming Air Base, 1989
- Tornado F.3, ZE808/GF, No.43 Sq., Royal Air Force, Leuchars Air Base, 1990
- Tornado F.3, ZG731, No.41 Fast Jet and Weapons Operational Evaluation Unit, Royal Air Force (FJ&W OEU), Coningsby Air Base, 2008
These decals were designed to be used with 1:72 Airfix, Hasegawa, Italeri, Tamiya and Revell kits.
Avia S-199 ‘Bubble Canopy & Wing Guns‘
Two injection-moulded kits are supplied in this box and each kit contains 32 parts and one clear part (the cockpit canopy). A comprehensive instruction leaflet and a decal sheet are included. The rear side of the box now comprises the representation of a tarmac section of a military airfield which can be cut out and used as a display base for the assembled model.
NOTE: these kits were re-designed and new masters were made. The cockpit canopies were 3D designed and made by injection moulding into a metal mould.
Colour schemes included in the kit:
1) S-199 (Avia-built), Black JV-2 (c/n 132), 2nd Sq., 1st Air Regiment, Czechoslovak Air Force, Zvolen (Tri Duby) airfield, 1949
2) S-199 (Avia-built), Black MR-4 (c/n 155), 2nd Sq., 8th Air Regiment, Czechoslovak Air Force, Brno-Černovice airfield, 1948-49
3) S-199 (Avia-built), White IV-40 (c/n 170), 1st Sq., 7th Air Regiment, Czechoslovak Air Force, Brno-Černovice airfield, 1948-49
4) S-199 (Avia-built), Red OK-BYE (c/n 182), Police Air Patrol Unit, Czechoslovak Police Air Force, Prague-Ruzyně airport, 1949
Embraer A-29B SUPER TUCANO
3D printed resin model kit
Brazilian Air Force.
The Embraer EMB 314 Super Tucano (lit. 'Super Toucan'), also named ALX or A-29, is a Brazilian turboprop light attack and counter-insurgency aircraft designed and built by Embraer as a development of the Embraer EMB 312 Tucano. The A-29 Super Tucano carries a wide variety of weapons, including precision-guided munitions, and was designed to be a low-cost system operated in low-threat environments.
Bf109F/G - Seatbelts 1/144 - 144001
New HGW printed decals for 1/144 scale models.
The decals are printed using a special technology that allows them to be transferred from the backing paper without a carrier lacquer. Simply wet the decals with clean water, peel them off the backing paper, and apply them to the pilot's seat. And you're done.
The thickness of the decals is proportional to the 1/144 scale.
Slovak AF insignia 1939-45
Decal sheets containing national insignia and/or tricolour stripes, and/or serial numbers/letters and/or various symbols and inscriptions in 1:144th scale. Due to their generic nature they can also be used for other scales (1:72, 1:87, 1:100 etc.).
Two sheets of decals are included in this set.
Detailed product specification:
- insignia diameters: 560,650,950,1100,1300 mm
scale diameters: 3.9;4.5;6.6;7.6;9.0 mm - cross sizes: 550,800,920,1000,1300 mm
scale sizes: 3.8;5.6;6.4;6.9;9.0 mm
Fokker S-11 "INSTRUCTOR" the Brazilian Air Force
3D printed resin kit with 3D printed clear resin canopy.
The Fokker S-11 Instructor is a single-engine two-seater propeller aircraft designed and manufactured by the Dutch aircraft manufacturer Fokker. It first flew in December 1947 and went on production, serving in several Air Forces in the late 20th century, including with Dutch, Italian, Israeli, Paraguay, Bolivian and Brazilian armed forces.
D3A1 Val vacu canopy (Trumpeter/Monochrome kit)
vacu canopy for Trumpeter-Monochrome kit
Czechoslovak/Czech AF flag insignia, 2 sets
Decal sheets containing national insignia and/or tricolour stripes, and/or serial numbers/letters and/or various symbols and inscriptions in 1:144th scale.
Two sheets of decals are included in this set.
- flags: 1350×1200, 550×350, 470×320, 450×250 mm
scale sizes: 9.4×8.3;3.8×2.4;3.3×2.2;3.1×1.7 mm
Decals for the following aircraft are included:
- Avia BH-21, Aero L-29A and L-39C, Mil Mi-17 and Mi-2
These decals were designed to be used with 1:144 MARK I, Eastern Express and Vizimodels kits.
Embraer A-29B SUPER TUCANO Colombian Air Force
3D printed resin model kit
Colombian Air Force
The Embraer EMB 314 Super Tucano (lit. 'Super Toucan'), also named ALX or A-29, is a Brazilian turboprop light attack and counter-insurgency aircraft designed and built by Embraer as a development of the Embraer EMB 312 Tucano. The A-29 Super Tucano carries a wide variety of weapons, including precision-guided munitions, and was designed to be a low-cost system operated in low-threat environments.
F-104C ‘In Vietnam War’ Conversion Set
This set of injection-moulded conversion (differential) parts contains 8 parts. For modeller’s convenience a display base, made of pasteboard card, depicting tarmac section of the military airport is added. A comprehensive instruction leaflet and a decal sheet are included.
Colour schemes included in the kit:
1) Lockheed F-104C-5-LO Starfighter, s/n 56-0892 (c/n 1180), Black 60892, 436th TFS (Tactical Fighter Squadron), 479th TFW (Tactical Fighter Wing), US Air Force, Da Nang Air Base, Vietnam, 1965
2) Lockheed F-104C-5-LO Starfighter, s/n 57-0927 (c/n 1244), Black 70927, ‘Debbie Sue’, 435th TFS (Tactical Fighter Squadron), 479th and 8th TFWs (Tactical Fighter Wing), US Air Force, Udorn Royal Thai Air Force Base, Thailand, 1967
3) Lockheed F-104C-5-LO Starfighter, s/n 56-0910 (c/n 1198), Black 0-60910, ‘Pussycat’, 435th TFS (Tactical Fighter Squadron), 479th and 8th TFWs (Tactical Fighter Wing), US Air Force, Udorn Royal Thai Air Force Base, Thailand, 1967
F/A-18C in US Navy
Decal sheets containing national insignia and/or tricolour stripes and/or serial numbers/letters in 1:144th scale. These decals are specifically designed for particular aircraft types and to match existing model kits.
One sheet of decals is included in this set.
Detailed product specification:
Decals for the following aircraft are included:
- F/A-18C, 300/AD, VFA-106 ‘Gladiators’, NAS Oceana, Virginia Beach, Virginia, U.S.A., 2016
- F/A-18C, 300/AB, VFA-136 ‘Knighthawks’, NAS Oceana, Virginia Beach, Virginia, U.S.A., 2007
- F/A-18C, 400/NH, VFA-86 ‘Sidewinders’, USS Nimitz, U.S.A., 2003
- F/A-18C, 25, VFA-122 ‘Flying Eagles’, NAS Lemoore, California, U.S.A., 2011
These decals were designed to be used with 1:144 Revell and Dragon kits.
Boeing (EMB) CH-47C CHINOOK
Miniwing Decals 1:144
Italian Air Force
A decal set for plastic kit (Revell kit recommended)
Luftwaffe Crosses (Balkenkreuz), late type – Black and White, 2 sets
Decal sheets containing national insignia and/or tricolour stripes, and/or serial numbers/letters and/or various symbols and inscriptions in 1:72nd scale.
Two sheets of decals are included in this set.
Detailed product specification:
- insignia sizes: 600, 800, 900, 1000, 1200 mm
scale sizes: 8.3;11.1;12.5;13.9;16.7 mm
US Army 24″ lettering – Black and Blue DMK144128
Decal sheets containing national insignia and/or tricolour stripes, and/or serial numbers/letters and/or various symbols and inscriptions in 1:144th scale. Due to their generic nature they can also be used for other scales (1:72, 1:87, 1:100 etc.).
Two sheets of decals are included in this set.
Detailed product specification:
- letter heights: 24″
scale heights: 4.2 mm
Yakovlev Yak-38U FORGER-B
AVAILABLE FROM MARCH 2026
High quality 3d printed resin kit
The Yakovlev Yak-38U (NATO reporting name: Forger-B) is the two-seat conversion trainer variant of the Soviet Navy's first operational VTOL (Vertical Take-Off and Landing) strike fighter, the Yak-38 Forger.
Design and Development- Two-Seat Configuration: To accommodate a second cockpit for the instructor, the fuselage was significantly enlarged and lengthened to 17.76 meters. This resulted in a distinct, "drooped" nose appearance compared to the single-seat version.
VTOL System: Like the standard model, the Yak-38U used a unique (and often criticized) three-engine arrangement: one R-27V-300 turbojet for main thrust and two dedicated RD-36-35FVR lift engines mounted vertically behind the cockpit.
Safety Features: It was equipped with an automatic ejection system that would fire if one of the engines failed during a vertical phase, or if the aircraft exceeded a certain pitch/roll angle.
Operational Service- Purpose: Its primary role was to train pilots for the difficult task of landing on the moving decks of Kiev-class aircraft carriers.
Production: A total of 38 units were produced between 1975 and 1985.
Users: Served exclusively with the Soviet Naval Aviation and later briefly with the Ukrainian Navy after the collapse of the USSR.
Embraer A-29B SUPER TUCANO U.S. Air Force
3D printed resin model kit
U.S. Air Force
The Embraer EMB 314 Super Tucano (lit. 'Super Toucan'), also named ALX or A-29, is a Brazilian turboprop light attack and counter-insurgency aircraft designed and built by Embraer as a development of the Embraer EMB 312 Tucano. The A-29 Super Tucano carries a wide variety of weapons, including precision-guided munitions, and was designed to be a low-cost system operated in low-threat environments.
F-35 Users – Insignia (II)
Decal sheets containing national insignia and/or tricolour stripes, and/or serial numbers/letters and/or various symbols and inscriptions in 1:144th scale.
Two sheets of decals are included in this set.
Armstrong Withworth METEOR NF.11 / RAF Service
Plastic Model kit - 38 plastic parts, 1 clear plastic canopy, canopy mask, decal sheet for two color variants.
Night Fighter variant with airborne interception (AI) radar designed and built by Armstrong Whitworth, three prototypes followed by 311 production aircraft for the Royal Air Force and 20 for the Royal Danish Air Force.
DHC-6 Twin Otter ‘On wheels, skis and floats’
This injection-moulded kit contains 65 parts. A comprehensive decal sheet is included.
The rear side of the box now comprises the representation of a tarmac section of the airfield which can be cut out and used as a display base for the assembled model.
Colour schemes included in the kit:
1) de Havilland Canada DHC-6 (Series 100) Twin Otter, N125SA (MSN 104), ‘Skydive Perris’, Perris Valley Aviation Services Inc., Perris Valley Airport, California, U.S.A., 2018-25
2) de Havilland Canada DHC-6 (Series 100) Twin Otter, C-GGAW (MSN 86), ‘608ʼ, West Coast Air, Victoria Inner Harbour Airport, British Columbia, Canada, 1999-2000
3) de Havilland Canada DHC-6 (Series 300) Twin Otter, TF-JMC (MSN 413), ‘Air Iceland’, Flugfélag Íslands, Reykjavík Airport, Iceland, during The British Kangerdlugssuaq Expedition to East Greenland, July 2005
Tornado F.3 in Italian & Saudi Arabian AF DMF7210
Decal sheets containing national insignia and/or tricolour stripes and/or serial numbers/letters in 1:72nd scale. These decals are specifically designed for particular aircraft types and to match existing model kits.
One sheet of decals is included in this set.
Decals for the following aircraft are included:
- Tornado F.3(T), MM55057 (ZE837), 36-03, 36th Wing (36° Stormo), Italian Air Force, Gioia del Colle Air Base, Italy, 1995-97
- Tornado F.3, MM7209 (ZE835), 53-07, 53rd Wing (53° Stormo), Italian Air Force, Cameri Air Base, Italy, 2002
- Tornado F.3, 2904 (ZE884), No.29 Sq., Royal Saudi Air Force, King Abdulah Air Base, Saudi Arabia, 1989-2006
- Tornado F.3(T), 3462 (ZE944), No.34 Sq., Royal Saudi Air Force, King Abdulah Air Base, Saudi Arabia, 1989-91
These decals were designed to be used with 1:72 Airfix, Hasegawa, Italeri, Tamiya and Revell kits.
Hawker Hunter T.7 (RAF & Export) Conversion Set
Two conversion sets (injection-moulded parts) are included, each containing 14 parts and one clear part (the cockpit canopy). For modeller’s convenience a display base, made of pasteboard card, depicting tarmac section of the military airport is added. A comprehensive instruction leaflet and a decal sheet are included.
Colour schemes included in the kit:
1) Hawker Hunter T Mk.7A, XL568/ZF, No.12 Sq., RAF, Lossiemouth Air Base, Moray, Scotland, U.K., 1984-85
2) Hawker Hunter T Mk.7, N-302, Royal Netherlands Air Force (Koninklijke Luchtmacht, KLu), Twente Air Base, the Netherlands, autumn 1958
3) Hawker Hunter T Mk.53, 53-271, White ET-271, No.724 Sq. (Esk 724), Royal Danish Air Force (Kongelige Danske Flyvevåbnet), Skrydstrup Air Base, Denmark, 1970
4) Hawker Hunter T Mk.70, 70-617 (ex-XL605/G-9-214), No.6 Sq., Royal Saudi Air Force (Al-Quwwat al-Jawwiya al-Malakiya al-Saʻudiya), Taif Air Base, Saudi Arabia, late 1960s/early 1970s
Fokker S-11 "INSTRUCTOR" Isreali Air Force
3D printed resin kit with 3D printed clear resin canopy.
The Fokker S-11 Instructor is a single-engine two-seater propeller aircraft designed and manufactured by the Dutch aircraft manufacturer Fokker. It first flew in December 1947 and went on production, serving in several Air Forces in the late 20th century, including with Dutch, Italian, Israeli, Paraguay, Bolivian and Brazilian armed forces.
US Army 24″ lettering – Black and Blue
Decal sheets containing national insignia and/or tricolour stripes, and/or serial numbers/letters and/or various symbols and inscriptions in 1:72nd scale.
Two sheets of decals are included in this set.
Detailed product specification:
- letter heights: 24″
scale heights: 8.5 mm
US FIGHTERS - Seatbelts 1/144 - 144002
New HGW printed decals for 1/144 scale models.
The decals are printed using a special technology that allows them to be transferred from the backing paper without a carrier lacquer. Simply wet the decals with clean water, peel them off the backing paper, and apply them to the pilot's seat. And you're done.
The thickness of the decals is proportional to the 1/144 scale.
Helibras UH-12 Esquilo Brazilian Navy
AVAILABLE DURING MARCH 2026
High quality 3D printed resin kit
In the modern context, "UH-12" is the military designation used by the Brazilian Navy (Marinha do Brasil) for the Helibras HB 350B Esquilo. This is a licensed version of the Eurocopter/Airbus AS350 Écureuil (Squirrel).
Manufacturer: Produced by Helibras in Brazil, a subsidiary of Airbus Helicopters.
Role: Operates as a light utility helicopter for patrol, rescue, and logistical support.
Key Features: It features a single-engine design (Turbomeca Arriel) and a three-blade "Starflex" main rotor.
Agusta/Westland AW109 LUH
quality 3D printed model kit by SMALL SCALE SHOP well known from Shapeways.Box contains 3D printed parts, a clear 3D printed canopy, a decal sheet for one (Swedish) plane and an instruction sheet.Expexted availability during May2026
The AgustaWestland AW109, originally the Agusta A109, is a lightweight, twin-engine, eight-seat multi-purpose helicopter designed and initially produced by the Italian rotorcraft manufacturer Agusta. It was the first all-Italian helicopter to be mass-produced. Its production has been continued by Agusta's successor companies,formerly AgustaWestland, merged into the new Finmeccanica since 2016, presently Leonardo.
Fokker S-11 "INSTRUCTOR" the Dutch Air Force
3D printed resin kit with 3D printed clear resin canopy.
The Fokker S-11 Instructor is a single-engine two-seater propeller aircraft designed and manufactured by the Dutch aircraft manufacturer Fokker. It first flew in December 1947 and went on production, serving in several Air Forces in the late 20th century, including with Dutch, Italian, Israeli, Paraguay, Bolivian and Brazilian armed forces.
Armstrong Withworth METEOR NF.14
AVAILABLE IN THE 1ST WEEK 2026
British Night FighterPlastic model kit
37 plastic parts + 1 clear plastic part
Decal sheet for 3 color variants
Canopy mask included
History: The Meteor NF.14 Night Fighter was the last major development of a line that started in July 1944, with the first jet aircraft to go into service with the Royal Air Force, and included the F.4, F.8 and T.7. The NF.14 was a two-seat, twin-engined monoplane, powered by two Rolls-Royce Derwent 8 turbojets, each delivering 3,600 lb thrust. The service ceiling was 40,000 feet and the maximum speed was 579 mph. Its range, with ventral and underwing tanks, was approximately 950 miles at altitude.
Boeing CH-47 CHINOOK
Miniwing decal set for CH-47 Chinook (recommended Revell kit, but you can use it for Academy, F-Toys...)Scale: 1/144
Luftwaffe WWII Crosses (Balkenkreuz), late type – Black/White
Decal sheets containing national insignia and/or tricolour stripes, and/or serial numbers/letters and/or various symbols and inscriptions in 1:144th scale. Due to their generic nature they can also be used for other scales (1:72, 1:87, 1:100 etc.).
Two sheets of decals are included in this set.
Detailed product specification:
- insignia sizes: 600,800,850,900,950,1000 mm
scale sizes: 4.2;5.6;5.9;6.3;6.6;6.9 mm
Eurocopter AS.350 ECUREUIL - Washington DC Police department
AVAILABLE DURING MARCH 2026
High quality 3D resin printed kit
The Airbus AS350 Écureuil (Squirrel), also marketed as the AStar in North America, is one of the most successful and versatile light utility helicopters in aviation history.
Feature Specification (Standard AS350 B3 / H125)Engine 1 × Safran (Turbomeca) Arriel 2D (approx. 848-952 shp)Capacity 1 Pilot + 5 to 6 PassengersMax Speed 287 km/h (155 knots)Cruise Speed ~245 km/h (132 knots)Range 630 – 660 km (approx. 350-400 miles)
Rotor System 3-blade "Starflex" main rotor head made of composite materials
History and RecordsOrigins: Developed by the French company Aérospatiale to replace the Alouette II, it first flew on June 27, 1974.
Everest World Record: On May 14, 2005, pilot Didier Delsalle landed a standard AS350 B3 on the summit of Mount Everest (8,848 meters), setting a world record for the highest takeoff and landing that remains unbroken.
Evolution: Over the decades, the manufacturer name changed from Aérospatiale to Eurocopter and finally to Airbus Helicopters. Since 2015, the latest version of the AS350 B3e has been rebranded as the Airbus H125.
Do-335 A „Pfeil“ - vacu canopy, single seat (Brengun kit)
vacu canopy for Brengun kit, two variants
