Fieseler Fi 103 A (V-1) with transport trailer
esin kit with decals and P -E parts in 1/144 scale.
Fieseler Fii 103 A-1 Re IV Reichenberg with transport trailer
Resin kit with decals and P -E parts in 1/144 scale.
Do-335 „Pfeil“ All versions - accessories (Brengun kit)
PE/resin set pro model fy. Brengun
Embraer A-29B SUPER TUCANO U.S. Air Force
3D printed resin model kit
U.S. Air Force
The Embraer EMB 314 Super Tucano (lit. 'Super Toucan'), also named ALX or A-29, is a Brazilian turboprop light attack and counter-insurgency aircraft designed and built by Embraer as a development of the Embraer EMB 312 Tucano. The A-29 Super Tucano carries a wide variety of weapons, including precision-guided munitions, and was designed to be a low-cost system operated in low-threat environments.
Curtiss P-40 over Pearl Harbor
Decal sheet in 1/144 scale .
2 decal versions : Curtiss P-40B
Boeing CH-47 CHINOOK
Miniwing decal set for CH-47 Chinook (recommended Revell kit, but you can use it for Academy, F-Toys...)Scale: 1/144
Armstrong Withworth METEOR NF.13 / Killers of the Middle East
Plastic Model kit - 38 plastic parts, 1 clear plastic canopy, canopy mask, decal sheet for two color variants.
"Tropicalised" version of the NF.11 to replace the Mosquito NF.36 for service with 39 Squadron in Malta and Cyprus and 219 Squadron based in Egypt.
Armstrong Withworth METEOR NF.11 / NATO Users
Plastic Model kit - 38 plastic parts, 1 clear plastic canopy, canopy mask, decal sheet for two color variants.
Night Fighter variant with airborne interception (AI) radar designed and built by Armstrong Whitworth, three prototypes followed by 311 production aircraft for the Royal Air Force and 20 for the Royal Danish Air Force.
Yakovlev Yak-38U FORGER-B
AVAILABLE FROM MARCH 2026
High quality 3d printed resin kit
The Yakovlev Yak-38U (NATO reporting name: Forger-B) is the two-seat conversion trainer variant of the Soviet Navy's first operational VTOL (Vertical Take-Off and Landing) strike fighter, the Yak-38 Forger.
Design and Development- Two-Seat Configuration: To accommodate a second cockpit for the instructor, the fuselage was significantly enlarged and lengthened to 17.76 meters. This resulted in a distinct, "drooped" nose appearance compared to the single-seat version.
VTOL System: Like the standard model, the Yak-38U used a unique (and often criticized) three-engine arrangement: one R-27V-300 turbojet for main thrust and two dedicated RD-36-35FVR lift engines mounted vertically behind the cockpit.
Safety Features: It was equipped with an automatic ejection system that would fire if one of the engines failed during a vertical phase, or if the aircraft exceeded a certain pitch/roll angle.
Operational Service- Purpose: Its primary role was to train pilots for the difficult task of landing on the moving decks of Kiev-class aircraft carriers.
Production: A total of 38 units were produced between 1975 and 1985.
Users: Served exclusively with the Soviet Naval Aviation and later briefly with the Ukrainian Navy after the collapse of the USSR.
Provost PE Parts
Comprehensive update set with external and internal details for Miniwing Percival Provost series kits.
Main features:
- pilot seats and seatbelts,
- instrument panel,
- cockpit internal framing,
- engine cooling flaps,
- selection of air scoops and hatches,
- landing gear legs details,
- tail gear assembly,
- small surface details and antennae,
- windscreen wipers,
- bomb racks,
- unguided rocket rails.
Additionally this set includes 3D-printed resin wafer containing:
- engine,
- main wheels,
- venturi tube,
- engine cowling upper air scoop.
PE fret size:
- 0.1 mm: 40x60 mm
Resin wafer size:
- 25x10 mm
This set caters one model.
F/A-18C in US Navy
Decal sheets containing national insignia and/or tricolour stripes and/or serial numbers/letters in 1:144th scale. These decals are specifically designed for particular aircraft types and to match existing model kits.
One sheet of decals is included in this set.
Detailed product specification:
Decals for the following aircraft are included:
- F/A-18C, 300/AD, VFA-106 ‘Gladiators’, NAS Oceana, Virginia Beach, Virginia, U.S.A., 2016
- F/A-18C, 300/AB, VFA-136 ‘Knighthawks’, NAS Oceana, Virginia Beach, Virginia, U.S.A., 2007
- F/A-18C, 400/NH, VFA-86 ‘Sidewinders’, USS Nimitz, U.S.A., 2003
- F/A-18C, 25, VFA-122 ‘Flying Eagles’, NAS Lemoore, California, U.S.A., 2011
These decals were designed to be used with 1:144 Revell and Dragon kits.
PZL TS-11 "ISKRA" Indian Air Force
3D printed resin model kit
The PZL TS-11 Iskra (English: Spark) is a Polish jet trainer, developed and manufactured by aircraft company PZL- Mielec. It was used by the air forces of Plandand India. It is notable as being the first domestically developed jet aircraft to be produced by Poland, its service for over 50 years as the principal training aircraft of the Polish Air Force. At the time of its retirement in 2021, it was the oldest jet-propelled aircraft still in service in Poland.
Messerschmitt Bf 109K-4 ‘Konrad’
Two injection-moulded kits are supplied in this box and each kit contains 27 parts and one clear part (the cockpit canopy). A comprehensive instruction leaflet and a decal sheet are included. The rear side of the box now comprises the representation of a tarmac section of a military airfield which can be cut out and used as a display base for the assembled model.
NOTE: these kits were re-designed and new masters were made. The cockpit canopies were 3D designed and made by injection moulding into a metal mould.
Colour schemes included in the kit:
1) Messerschmitt Bf 109K-4, Black 265 (W.Nr. 334265), 1./JG 77, Luftwaffe, Amberg-Schafhof airfield, Germany, April 1945
2) Messerschmitt Bf 109K-4, Blue 16, (W.Nr. 331xxx), 12./JG 27, Luftwaffe, Germany, spring 1945
3) Messerschmitt Bf 109K-4, Black 4 (W.Nr. 332529), Stab JG 52, Luftwaffe, Deutsch Brod airfield, Bohemia-Moravia Protectorate, May 1945
4) Messerschmitt Bf 109K-4, Yellow 2 (W.Nr. unknown), 11./JG 3, Luftwaffe, Pasewalk airfield, Germany, March 1945
AMD Mirage IIICJ ‘Shahak in IAF Service’
This injection-moulded kit contains 47 parts and one clear part (the cockpit canopy). A comprehensive instruction leaflet and a decal sheet are included. The rear side of the box now comprises the representation of a tarmac section of a military airfield which can be cut out and used as a display base for the assembled model.
Colour schemes included in the kit:
1) AMD Mirage IIICJ “Shahakˮ (Skyblazer), Black 725, No.117 ‘The First Jet’ Sq. (117 Tayeset), Israeli Air Force (Kheil Ha’Avir), Ramat David Air Base, Israel, 1966
2) AMD Mirage IIICJ “Shahakˮ (Skyblazer), Black 159, No.101 ‘The First Fighter’ Sq. (101 Tayeset), Israeli Air Force (Kheil Ha’Avir), Hatzor Air Base, Israel, 1975
3) AMD Mirage IIICJ “Shahakˮ (Skyblazer), Black 179, No.253 ‘The Iron Bird’ Sq. (253 Tayeset), Israeli Air Force (Kheil Ha‘Avir), Eitam Air Base, Israel, 1982
4) AMD Mirage IIICJ “Shahakˮ (Skyblazer), Black 103, No.253 ‘The Iron Bird’ Sq. (253 Tayeset), Israeli Air Force (Kheil Ha‘Avir), Eitam Air Base, Israel, 1982
Luxembourg Army Aviation Insignia
Decal sheets containing national insignia and/or tricolour stripes, and/or serial numbers/letters and/or various symbols and inscriptions in 1:144th scale. Due to their generic nature they can also be used for other scales (1:72, 1:87, 1:100 etc.).
Two sheets of decals are included in this set.
Detailed product specification:
- insignia diameters: 800,1000 mm
scale diameters: 5.6;6.9 mm
PBY-5 Catalina Black Cat - RAAF version
Conversion set with resin parts, decals and P -E parts in 1/144 scale.
Agusta/Westland AW109 LUH
quality 3D printed model kit by SMALL SCALE SHOP well known from Shapeways.Box contains 3D printed parts, a clear 3D printed canopy, a decal sheet for one (Swedish) plane and an instruction sheet.Expexted availability during May2026
The AgustaWestland AW109, originally the Agusta A109, is a lightweight, twin-engine, eight-seat multi-purpose helicopter designed and initially produced by the Italian rotorcraft manufacturer Agusta. It was the first all-Italian helicopter to be mass-produced. Its production has been continued by Agusta's successor companies,formerly AgustaWestland, merged into the new Finmeccanica since 2016, presently Leonardo.
R-73 (AA-11 Archer) (4 pcs.)
Four 1/144 R-73 short range IR guided missiles (AA-11 Archer).Set includes:
- 4 3D printed missiles
- decal sheets with markings for 4 missiless
(Real product shown on photos - the specimen is attached to 0.6mm dia needle)
BAC 1-11-500 ‘Monarch, Debonair, Philippine Airlines’
This injection-moulded kit contains 51 parts. A comprehensive instruction leaflet and a decal sheet are included. The rear side of the box now comprises the representation of a tarmac section of the civil airport which can be cut out and used as a display base for the assembled model.
Colour schemes included in the kit:
1) British Aircraft Corporation BAC 1-11-500 (518FG), G-AXMG (c/n 201), Monarch Airlines Ltd., Birmingham, Gatwick, Luton and other various airports, U.K., 1984
2) British Aircraft Corporation BAC 1-11-500 (530FX), G-AYOP (c/n 233), Debonair Airways Ltd. (a/c leased from European Aviation Air Charter Ltd.), London Luton Airport, Bedfordshire, U.K., 1999
3) British Aircraft Corporation BAC 1-11-500 (501EX), RP-C1188 (c/n 209), ‘Super PAL Jet’, Philippine Airlines Inc. (PAL), Manila-Ninoy Aquino International Airport, the Philippines, 1977-90
Slovak AF insignia 1939-45
Decal sheets containing national insignia and/or tricolour stripes, and/or serial numbers/letters and/or various symbols and inscriptions in 1:144th scale. Due to their generic nature they can also be used for other scales (1:72, 1:87, 1:100 etc.).
Two sheets of decals are included in this set.
Detailed product specification:
- insignia diameters: 560,650,950,1100,1300 mm
scale diameters: 3.9;4.5;6.6;7.6;9.0 mm - cross sizes: 550,800,920,1000,1300 mm
scale sizes: 3.8;5.6;6.4;6.9;9.0 mm
Boeing CH-47C CHINOOK
Miniwing Decals 1:144
Australian Air Force
A decal set for plastic kit (Revell kit recommended)
Slovak National Uprising 1944/ Czechoslovak Legends in La-5FN´s - Part I
Decal sheet and masks in 1/144 scale
Heinkel He219 UHU - Seatbelts 1/144 - 144004
New HGW printed decals for 1/144 scale models.
The decals are printed using a special technology that allows them to be transferred from the backing paper without a carrier lacquer. Simply wet the decals with clean water, peel them off the backing paper, and apply them to the pilot’s seat. And you’re done.
The thickness of the decals is proportional to the 1/144 scale.
Slovak National Uprising 1944/ Czechoslovak Legends in La-5FN´s - Part II
Decal sheet and masks in 1/144 scale
Avia S-199 ‘Bubble Canopy & Wing Guns‘
Two injection-moulded kits are supplied in this box and each kit contains 32 parts and one clear part (the cockpit canopy). A comprehensive instruction leaflet and a decal sheet are included. The rear side of the box now comprises the representation of a tarmac section of a military airfield which can be cut out and used as a display base for the assembled model.
NOTE: these kits were re-designed and new masters were made. The cockpit canopies were 3D designed and made by injection moulding into a metal mould.
Colour schemes included in the kit:
1) S-199 (Avia-built), Black JV-2 (c/n 132), 2nd Sq., 1st Air Regiment, Czechoslovak Air Force, Zvolen (Tri Duby) airfield, 1949
2) S-199 (Avia-built), Black MR-4 (c/n 155), 2nd Sq., 8th Air Regiment, Czechoslovak Air Force, Brno-Černovice airfield, 1948-49
3) S-199 (Avia-built), White IV-40 (c/n 170), 1st Sq., 7th Air Regiment, Czechoslovak Air Force, Brno-Černovice airfield, 1948-49
4) S-199 (Avia-built), Red OK-BYE (c/n 182), Police Air Patrol Unit, Czechoslovak Police Air Force, Prague-Ruzyně airport, 1949
Luftwaffe Crosses (Balkenkreuz), early type, 2 sets
Decal sheets containing national insignia and/or tricolour stripes, and/or serial numbers/letters and/or various symbols and inscriptions in 1:72nd scale.
Two sheets of decals are included in this set.
Detailed product specification:
- insignia sizes: 600, 700, 800, 900, 1000, 1200 mm
scale sizes: 8.3;9.7;11.1;12.5;13.9;16.7 mm
Nepalese AF Insignia
available in February
Decal sheets containing national insignia and/or tricolour stripes, and/or serial numbers/letters and/or various symbols and inscriptions in 1:144th scale. Due to their generic nature they can also be used for other scales (1:72, 1:87, 1:100 etc.).
Two sheets of decals are included in this set.
Detailed product specification:
- insignia sizes: 400,450,500,800 mm
scale sizes: 2.8;3.1;3.5;5.6 mm
DHC-6 Twin Otter ‘On wheels, skis and floats’
This injection-moulded kit contains 65 parts. A comprehensive decal sheet is included.
The rear side of the box now comprises the representation of a tarmac section of the airfield which can be cut out and used as a display base for the assembled model.
Colour schemes included in the kit:
1) de Havilland Canada DHC-6 (Series 100) Twin Otter, N125SA (MSN 104), ‘Skydive Perris’, Perris Valley Aviation Services Inc., Perris Valley Airport, California, U.S.A., 2018-25
2) de Havilland Canada DHC-6 (Series 100) Twin Otter, C-GGAW (MSN 86), ‘608ʼ, West Coast Air, Victoria Inner Harbour Airport, British Columbia, Canada, 1999-2000
3) de Havilland Canada DHC-6 (Series 300) Twin Otter, TF-JMC (MSN 413), ‘Air Iceland’, Flugfélag Íslands, Reykjavík Airport, Iceland, during The British Kangerdlugssuaq Expedition to East Greenland, July 2005
Luftwaffe Crosses (Balkenkreuz), late type – Black and White, 2 sets
Decal sheets containing national insignia and/or tricolour stripes, and/or serial numbers/letters and/or various symbols and inscriptions in 1:72nd scale.
Two sheets of decals are included in this set.
Detailed product specification:
- insignia sizes: 600, 800, 900, 1000, 1200 mm
scale sizes: 8.3;11.1;12.5;13.9;16.7 mm
R-60 (AA-8 Aphid) (4pcs.)
Four 1/144 R-60 short range IR guided missiles (AA-8 Aphid).Set includes:
- 4 3Dprinted missiles-- decal sheets with markings for 4 missiles
(Real product shown on photos - the specimen is attached to 0.6mm dia needle)
JB-2 Loon (V-1) with transport trailer
Resin kit with decals and P -E parts in 1/144 scale.
Fokker S-11 "INSTRUCTOR" the Dutch Air Force
3D printed resin kit with 3D printed clear resin canopy.
The Fokker S-11 Instructor is a single-engine two-seater propeller aircraft designed and manufactured by the Dutch aircraft manufacturer Fokker. It first flew in December 1947 and went on production, serving in several Air Forces in the late 20th century, including with Dutch, Italian, Israeli, Paraguay, Bolivian and Brazilian armed forces.
F-16 in service: IL, EG, IQ, JO
Decal sheets containing national insignia and/or tricolour stripes and/or serial numbers/letters in 1:144th scale. These decals are specifically designed for particular aircraft types and to match existing model kits.
One sheet of decals is included in this set.
Decals for the following aircraft are included:
- F-16C Fighting Falcon (GD-built), 536, s/n 90-0868 (c/n CJ-20, Block 40K), No.101 ‘The First Fighter’ Sq., during ‘Exercise Blue Wings 2020’ (Nörvenich AB, Germany), Israeli Air Force, Hatzor Air Base, Israel, 2020
- F-16C Fighting Falcon (GD-built), 9934, s/n 90-0930 (c/n BC-34, Block 40L), No.77 Tactical Fighter Sq., seen during joined exercise with the Hellenic AF (Andravida AB, Greece), Egyptian Air Force, Jiyanklis Air Base, Egypt, 2016
- F-16IQ (F-16C-52) Fighting Falcon (LM-built), 1615, s/n 12-0012 (c/n RA-9, Block 52+), No.9 ‘Black Panthers’ Sq., Iraqi Air Force, Balad Air Base, Iraq, 2016-26
- F-16AM Fighting Falcon (Fokker-built), 247, s/n 83-1199 (c/n 6D-106, Block 20 MLU), No.1 Sq., commemorating the 50th anniversary of the F-16 and seen during RIAT 2024 (Fairford AB, U.K.), Royal Jordanian Air Force, Muwaffaq Salti Air Base, Jordan, 2024
These decals were designed to be used with 1:144 Revell kits.
Embraer A-29B SUPER TUCANO
3D printed resin model kit
Brazilian Air Force.
The Embraer EMB 314 Super Tucano (lit. 'Super Toucan'), also named ALX or A-29, is a Brazilian turboprop light attack and counter-insurgency aircraft designed and built by Embraer as a development of the Embraer EMB 312 Tucano. The A-29 Super Tucano carries a wide variety of weapons, including precision-guided munitions, and was designed to be a low-cost system operated in low-threat environments.
Armstrong Withworth METEOR NF.11 / RAF Service
Plastic Model kit - 38 plastic parts, 1 clear plastic canopy, canopy mask, decal sheet for two color variants.
Night Fighter variant with airborne interception (AI) radar designed and built by Armstrong Whitworth, three prototypes followed by 311 production aircraft for the Royal Air Force and 20 for the Royal Danish Air Force.
Tornado F.3 in Italian & Saudi Arabian AF DMF7210
Decal sheets containing national insignia and/or tricolour stripes and/or serial numbers/letters in 1:72nd scale. These decals are specifically designed for particular aircraft types and to match existing model kits.
One sheet of decals is included in this set.
Decals for the following aircraft are included:
- Tornado F.3(T), MM55057 (ZE837), 36-03, 36th Wing (36° Stormo), Italian Air Force, Gioia del Colle Air Base, Italy, 1995-97
- Tornado F.3, MM7209 (ZE835), 53-07, 53rd Wing (53° Stormo), Italian Air Force, Cameri Air Base, Italy, 2002
- Tornado F.3, 2904 (ZE884), No.29 Sq., Royal Saudi Air Force, King Abdulah Air Base, Saudi Arabia, 1989-2006
- Tornado F.3(T), 3462 (ZE944), No.34 Sq., Royal Saudi Air Force, King Abdulah Air Base, Saudi Arabia, 1989-91
These decals were designed to be used with 1:72 Airfix, Hasegawa, Italeri, Tamiya and Revell kits.
Casa C-101
Casa C-101 "AVIOJET" 3D printer resin model kit by Small Scale Shop
The CASA C-101 Aviojet is a low-wing single engine jet-powered advanced trainer and light attack aircraft designed and manufactured by Spanish aircraft company Construcciones Aeronáuticas SA (CASA).
Do-335 A „Pfeil“ - vacu canopy, single seat (Brengun kit)
vacu canopy for Brengun kit, two variants
Luftwaffe WWII Crosses (Balkenkreuz), late type – Black/White
Decal sheets containing national insignia and/or tricolour stripes, and/or serial numbers/letters and/or various symbols and inscriptions in 1:144th scale. Due to their generic nature they can also be used for other scales (1:72, 1:87, 1:100 etc.).
Two sheets of decals are included in this set.
Detailed product specification:
- insignia sizes: 600,800,850,900,950,1000 mm
scale sizes: 4.2;5.6;5.9;6.3;6.6;6.9 mm
