Fieseler Fi 103 A (V-1) with transport trailer
esin kit with decals and P -E parts in 1/144 scale.
F-16 in service: BE, NL, DK, NO
Decal sheets containing national insignia and/or tricolour stripes and/or serial numbers/letters in 1:144th scale. These decals are specifically designed for particular aircraft types and to match existing model kits.
One sheet of decals is included in this set.
Decals for the following aircraft are included:
- F-16AM Fighting Falcon (Fokker-built), J-055, s/n 86-0055 (c/n 6D-138, Block 20 MLU), No. 313 Sq., scheme for ‘Tiger Meet 2010’, Royal Netherlands Air Force, Volkel Air Base, the Netherlands, 2010
- F-16AM Fighting Falcon (SABCA-built), FA-95, s/n 80-3586 (c/n 6H-95, Block 20 MLU), No. 349 Sq., commemorating the first F-16 to be phased out after 8,000 flight hours, Belgian Air Force, Kleine Brogel Air Base, Belgium, 2023
- F-16AM Fighting Falcon (SABCA-built), E-194, s/n 78-0194 (c/n 6F-21, Block 20 MLU), No. 727 Sq., celebratory colour scheme for 60 years of the RDAF, Royal Danish Air Force, Skrydstrup Air Base, Denmark, 2010
- F-16A Fighting Falcon (Fokker-built), 289, s/n 78-0289 (c/n 6K-18, Block 10), No. 338 Sq., highlighting the unit assignment to the NATO Rapid Reaction Force, Royal Norwegian Air Force, Ørland Air Base, Norway, 1995
These decals were designed to be used with 1:144 Revell kits.
Boeing (EMB) CH-47C CHINOOK
Miniwing Decals 1:144
Italian Air Force
A decal set for plastic kit (Revell kit recommended)
Boeing CH-47C CHINOOK
Miniwing Decals 1:144
Australian Air Force
A decal set for plastic kit (Revell kit recommended)
de Havilland DH.110 SEA VIXEN
de Havilland DH.110 SEA VIXEN
Detailed 3D printed resin kit, decals for one color version. It is a replacement for our discontinued cast resin construction kit.Expected availability during May 2026
The de Havilland DH.110 Sea Vixen is a British twin-engine, twin boom-tailed, two-seat, carrier-based fleet air-defence fighter flown by the Fleet Air Arm of the Royal Navy from the 1950s to the early 1970s. The Sea Vixen was designed by the de Havilland Aircraft Company during the late 1940s at its Hatfield factory in Hertfordshire, developed from the company's earlier first generation jet fighters.[a] It was later called the Hawker Siddeley Sea Vixen after de Havilland was absorbed by the Hawker Siddeley Corporation in 1960.
The Sea Vixen had the distinction of being the first British two-seat combat aircraft to achieve supersonic speed, albeit not in level flight. Operating from British aircraft carriers, it was used in combat over Tanganyika and over Yemen during the Aden Emergency. In 1972, the Sea Vixen was retired in favour of the American-made McDonnell Douglas Phantom FG.1 interceptor.
Provost PE Parts
Comprehensive update set with external and internal details for Miniwing Percival Provost series kits.
Main features:
- pilot seats and seatbelts,
- instrument panel,
- cockpit internal framing,
- engine cooling flaps,
- selection of air scoops and hatches,
- landing gear legs details,
- tail gear assembly,
- small surface details and antennae,
- windscreen wipers,
- bomb racks,
- unguided rocket rails.
Additionally this set includes 3D-printed resin wafer containing:
- engine,
- main wheels,
- venturi tube,
- engine cowling upper air scoop.
PE fret size:
- 0.1 mm: 40x60 mm
Resin wafer size:
- 25x10 mm
This set caters one model.
Red Top (4 pcs.)
Four 1/144 Hawker Siddley Red Top IR guided missiles.
Set includes:
- 4 3D printed missiles
- decal sheets with markings for 4 missiless
(Real product shown on photos - the specimen is attached to 0.6mm dia needle)
Fokker S-11 "INSTRUCTOR" the Brazilian Air Force
3D printed resin kit with 3D printed clear resin canopy.
The Fokker S-11 Instructor is a single-engine two-seater propeller aircraft designed and manufactured by the Dutch aircraft manufacturer Fokker. It first flew in December 1947 and went on production, serving in several Air Forces in the late 20th century, including with Dutch, Italian, Israeli, Paraguay, Bolivian and Brazilian armed forces.
Armstrong Withworth METEOR NF.11 / NATO Users
Plastic Model kit - 38 plastic parts, 1 clear plastic canopy, canopy mask, decal sheet for two color variants.
Night Fighter variant with airborne interception (AI) radar designed and built by Armstrong Whitworth, three prototypes followed by 311 production aircraft for the Royal Air Force and 20 for the Royal Danish Air Force.
Luxembourg Army Aviation Insignia
Decal sheets containing national insignia and/or tricolour stripes, and/or serial numbers/letters and/or various symbols and inscriptions in 1:144th scale. Due to their generic nature they can also be used for other scales (1:72, 1:87, 1:100 etc.).
Two sheets of decals are included in this set.
Detailed product specification:
- insignia diameters: 800,1000 mm
scale diameters: 5.6;6.9 mm
F-104C ‘In Vietnam War’ Conversion Set
This set of injection-moulded conversion (differential) parts contains 8 parts. For modeller’s convenience a display base, made of pasteboard card, depicting tarmac section of the military airport is added. A comprehensive instruction leaflet and a decal sheet are included.
Colour schemes included in the kit:
1) Lockheed F-104C-5-LO Starfighter, s/n 56-0892 (c/n 1180), Black 60892, 436th TFS (Tactical Fighter Squadron), 479th TFW (Tactical Fighter Wing), US Air Force, Da Nang Air Base, Vietnam, 1965
2) Lockheed F-104C-5-LO Starfighter, s/n 57-0927 (c/n 1244), Black 70927, ‘Debbie Sue’, 435th TFS (Tactical Fighter Squadron), 479th and 8th TFWs (Tactical Fighter Wing), US Air Force, Udorn Royal Thai Air Force Base, Thailand, 1967
3) Lockheed F-104C-5-LO Starfighter, s/n 56-0910 (c/n 1198), Black 0-60910, ‘Pussycat’, 435th TFS (Tactical Fighter Squadron), 479th and 8th TFWs (Tactical Fighter Wing), US Air Force, Udorn Royal Thai Air Force Base, Thailand, 1967
F-35 Users – Insignia (II)
Decal sheets containing national insignia and/or tricolour stripes, and/or serial numbers/letters and/or various symbols and inscriptions in 1:144th scale.
Two sheets of decals are included in this set.
Luftwaffe Crosses (Balkenkreuz), late type – Black and White, 2 sets
Decal sheets containing national insignia and/or tricolour stripes, and/or serial numbers/letters and/or various symbols and inscriptions in 1:72nd scale.
Two sheets of decals are included in this set.
Detailed product specification:
- insignia sizes: 600, 800, 900, 1000, 1200 mm
scale sizes: 8.3;11.1;12.5;13.9;16.7 mm
Tornado F.3 in Italian & Saudi Arabian AF
Decal sheets containing national insignia and/or tricolour stripes and/or serial numbers/letters in 1:144th scale. These decals are specifically designed for particular aircraft types and to match existing model kits.
One sheet of decals is included in this set.
Decals for the following aircraft are included:
- Tornado F.3(T), MM55057 (ZE837), 36-03, 36th Wing (36° Stormo), Italian Air Force, Gioia del Colle Air Base, Italy, 1995-97
- Tornado F.3, MM7209 (ZE835), 53-07, 53rd Wing (53° Stormo), Italian Air Force, Cameri Air Base, Italy, 2002
- Tornado F.3, 2904 (ZE884), No.29 Sq., Royal Saudi Air Force, King Abdulah Air Base, Saudi Arabia, 1989-2006
- Tornado F.3(T), 3462 (ZE944), No.34 Sq., Royal Saudi Air Force, King Abdulah Air Base, Saudi Arabia, 1989-91
AMD Mirage IIICJ ‘Shahak in IAF Service’
This injection-moulded kit contains 47 parts and one clear part (the cockpit canopy). A comprehensive instruction leaflet and a decal sheet are included. The rear side of the box now comprises the representation of a tarmac section of a military airfield which can be cut out and used as a display base for the assembled model.
Colour schemes included in the kit:
1) AMD Mirage IIICJ “Shahakˮ (Skyblazer), Black 725, No.117 ‘The First Jet’ Sq. (117 Tayeset), Israeli Air Force (Kheil Ha’Avir), Ramat David Air Base, Israel, 1966
2) AMD Mirage IIICJ “Shahakˮ (Skyblazer), Black 159, No.101 ‘The First Fighter’ Sq. (101 Tayeset), Israeli Air Force (Kheil Ha’Avir), Hatzor Air Base, Israel, 1975
3) AMD Mirage IIICJ “Shahakˮ (Skyblazer), Black 179, No.253 ‘The Iron Bird’ Sq. (253 Tayeset), Israeli Air Force (Kheil Ha‘Avir), Eitam Air Base, Israel, 1982
4) AMD Mirage IIICJ “Shahakˮ (Skyblazer), Black 103, No.253 ‘The Iron Bird’ Sq. (253 Tayeset), Israeli Air Force (Kheil Ha‘Avir), Eitam Air Base, Israel, 1982
Embraer A-29B SUPER TUCANO U.S. Air Force
3D printed resin model kit
U.S. Air Force
The Embraer EMB 314 Super Tucano (lit. 'Super Toucan'), also named ALX or A-29, is a Brazilian turboprop light attack and counter-insurgency aircraft designed and built by Embraer as a development of the Embraer EMB 312 Tucano. The A-29 Super Tucano carries a wide variety of weapons, including precision-guided munitions, and was designed to be a low-cost system operated in low-threat environments.
PZL TS-11 "ISKRA" Indian Air Force
3D printed resin model kit
The PZL TS-11 Iskra (English: Spark) is a Polish jet trainer, developed and manufactured by aircraft company PZL- Mielec. It was used by the air forces of Plandand India. It is notable as being the first domestically developed jet aircraft to be produced by Poland, its service for over 50 years as the principal training aircraft of the Polish Air Force. At the time of its retirement in 2021, it was the oldest jet-propelled aircraft still in service in Poland.
AMX International A-1 Brazil
quality 3D printed model kit by SMALL SCALE SHOP well known from Shapeways.Box contains 3D printed parts, a clear 3D printed canopy, a decal sheet for one (Brazil) plane and an instruction sheet.Expected availability during May 2026
The AMX International AMX is a ground-attack aircraft jointly developed by Brazil and Italy. The AMX is designated A-11 Ghibli by the Italian Air Force and A-1 by the Brazilian Air Force. The Italian name, "Ghibli", is taken from the hot dry wind of the Libyan Desert.
Firestreak (4 pcs.)
Four 1/144 de Havilland Firestreak IR guided missiles.
Set includes:
- 4 3D printed missiles
- decal sheets with markings for 4 missiless
(Real product shown on photos - the specimen is attached to 0.6mm dia needle)
Helibras UH-12 Esquilo Brazilian Navy
AVAILABLE DURING MARCH 2026
High quality 3D printed resin kit
In the modern context, "UH-12" is the military designation used by the Brazilian Navy (Marinha do Brasil) for the Helibras HB 350B Esquilo. This is a licensed version of the Eurocopter/Airbus AS350 Écureuil (Squirrel).
Manufacturer: Produced by Helibras in Brazil, a subsidiary of Airbus Helicopters.
Role: Operates as a light utility helicopter for patrol, rescue, and logistical support.
Key Features: It features a single-engine design (Turbomeca Arriel) and a three-blade "Starflex" main rotor.
Yakovlev Yak-38U FORGER-B
AVAILABLE FROM MARCH 2026
High quality 3d printed resin kit
The Yakovlev Yak-38U (NATO reporting name: Forger-B) is the two-seat conversion trainer variant of the Soviet Navy's first operational VTOL (Vertical Take-Off and Landing) strike fighter, the Yak-38 Forger.
Design and Development- Two-Seat Configuration: To accommodate a second cockpit for the instructor, the fuselage was significantly enlarged and lengthened to 17.76 meters. This resulted in a distinct, "drooped" nose appearance compared to the single-seat version.
VTOL System: Like the standard model, the Yak-38U used a unique (and often criticized) three-engine arrangement: one R-27V-300 turbojet for main thrust and two dedicated RD-36-35FVR lift engines mounted vertically behind the cockpit.
Safety Features: It was equipped with an automatic ejection system that would fire if one of the engines failed during a vertical phase, or if the aircraft exceeded a certain pitch/roll angle.
Operational Service- Purpose: Its primary role was to train pilots for the difficult task of landing on the moving decks of Kiev-class aircraft carriers.
Production: A total of 38 units were produced between 1975 and 1985.
Users: Served exclusively with the Soviet Naval Aviation and later briefly with the Ukrainian Navy after the collapse of the USSR.
Slovak AF insignia 1939-45
Decal sheets containing national insignia and/or tricolour stripes, and/or serial numbers/letters and/or various symbols and inscriptions in 1:144th scale. Due to their generic nature they can also be used for other scales (1:72, 1:87, 1:100 etc.).
Two sheets of decals are included in this set.
Detailed product specification:
- insignia diameters: 560,650,950,1100,1300 mm
scale diameters: 3.9;4.5;6.6;7.6;9.0 mm - cross sizes: 550,800,920,1000,1300 mm
scale sizes: 3.8;5.6;6.4;6.9;9.0 mm
F/A-18C in US Navy
Decal sheets containing national insignia and/or tricolour stripes and/or serial numbers/letters in 1:144th scale. These decals are specifically designed for particular aircraft types and to match existing model kits.
One sheet of decals is included in this set.
Detailed product specification:
Decals for the following aircraft are included:
- F/A-18C, 300/AD, VFA-106 ‘Gladiators’, NAS Oceana, Virginia Beach, Virginia, U.S.A., 2016
- F/A-18C, 300/AB, VFA-136 ‘Knighthawks’, NAS Oceana, Virginia Beach, Virginia, U.S.A., 2007
- F/A-18C, 400/NH, VFA-86 ‘Sidewinders’, USS Nimitz, U.S.A., 2003
- F/A-18C, 25, VFA-122 ‘Flying Eagles’, NAS Lemoore, California, U.S.A., 2011
These decals were designed to be used with 1:144 Revell and Dragon kits.
Fokker S-11 "INSTRUCTOR" the Dutch Air Force
3D printed resin kit with 3D printed clear resin canopy.
The Fokker S-11 Instructor is a single-engine two-seater propeller aircraft designed and manufactured by the Dutch aircraft manufacturer Fokker. It first flew in December 1947 and went on production, serving in several Air Forces in the late 20th century, including with Dutch, Italian, Israeli, Paraguay, Bolivian and Brazilian armed forces.
PBY-5 with MAD ( Magnetic Anomaly Detection system ) and with retrorockets
Conversion st with 3D resin parts, P-E parts and decals in 1/144 scale
US Army 24″ lettering – Black and Blue DMK144128
Decal sheets containing national insignia and/or tricolour stripes, and/or serial numbers/letters and/or various symbols and inscriptions in 1:144th scale. Due to their generic nature they can also be used for other scales (1:72, 1:87, 1:100 etc.).
Two sheets of decals are included in this set.
Detailed product specification:
- letter heights: 24″
scale heights: 4.2 mm
US FIGHTERS - Seatbelts 1/144 - 144002
New HGW printed decals for 1/144 scale models.
The decals are printed using a special technology that allows them to be transferred from the backing paper without a carrier lacquer. Simply wet the decals with clean water, peel them off the backing paper, and apply them to the pilot's seat. And you're done.
The thickness of the decals is proportional to the 1/144 scale.
Nepalese AF Insignia
available in February
Decal sheets containing national insignia and/or tricolour stripes, and/or serial numbers/letters and/or various symbols and inscriptions in 1:144th scale. Due to their generic nature they can also be used for other scales (1:72, 1:87, 1:100 etc.).
Two sheets of decals are included in this set.
Detailed product specification:
- insignia sizes: 400,450,500,800 mm
scale sizes: 2.8;3.1;3.5;5.6 mm
F-16 in service: IL, EG, IQ, JO
Decal sheets containing national insignia and/or tricolour stripes and/or serial numbers/letters in 1:144th scale. These decals are specifically designed for particular aircraft types and to match existing model kits.
One sheet of decals is included in this set.
Decals for the following aircraft are included:
- F-16C Fighting Falcon (GD-built), 536, s/n 90-0868 (c/n CJ-20, Block 40K), No.101 ‘The First Fighter’ Sq., during ‘Exercise Blue Wings 2020’ (Nörvenich AB, Germany), Israeli Air Force, Hatzor Air Base, Israel, 2020
- F-16C Fighting Falcon (GD-built), 9934, s/n 90-0930 (c/n BC-34, Block 40L), No.77 Tactical Fighter Sq., seen during joined exercise with the Hellenic AF (Andravida AB, Greece), Egyptian Air Force, Jiyanklis Air Base, Egypt, 2016
- F-16IQ (F-16C-52) Fighting Falcon (LM-built), 1615, s/n 12-0012 (c/n RA-9, Block 52+), No.9 ‘Black Panthers’ Sq., Iraqi Air Force, Balad Air Base, Iraq, 2016-26
- F-16AM Fighting Falcon (Fokker-built), 247, s/n 83-1199 (c/n 6D-106, Block 20 MLU), No.1 Sq., commemorating the 50th anniversary of the F-16 and seen during RIAT 2024 (Fairford AB, U.K.), Royal Jordanian Air Force, Muwaffaq Salti Air Base, Jordan, 2024
These decals were designed to be used with 1:144 Revell kits.
Czechoslovak/Czech AF flag insignia, 2 sets
Decal sheets containing national insignia and/or tricolour stripes, and/or serial numbers/letters and/or various symbols and inscriptions in 1:144th scale.
Two sheets of decals are included in this set.
- flags: 1350×1200, 550×350, 470×320, 450×250 mm
scale sizes: 9.4×8.3;3.8×2.4;3.3×2.2;3.1×1.7 mm
Decals for the following aircraft are included:
- Avia BH-21, Aero L-29A and L-39C, Mil Mi-17 and Mi-2
These decals were designed to be used with 1:144 MARK I, Eastern Express and Vizimodels kits.
Do-335 „Pfeil“ All versions - accessories (Brengun kit)
PE/resin set pro model fy. Brengun
Do-335 A „Pfeil“ - vacu canopy, single seat (Brengun kit)
vacu canopy for Brengun kit, two variants
Luftwaffe Crosses (Balkenkreuz), early type, 2 sets
Decal sheets containing national insignia and/or tricolour stripes, and/or serial numbers/letters and/or various symbols and inscriptions in 1:72nd scale.
Two sheets of decals are included in this set.
Detailed product specification:
- insignia sizes: 600, 700, 800, 900, 1000, 1200 mm
scale sizes: 8.3;9.7;11.1;12.5;13.9;16.7 mm
Agusta/Westland AW109 LUH
quality 3D printed model kit by SMALL SCALE SHOP well known from Shapeways.Box contains 3D printed parts, a clear 3D printed canopy, a decal sheet for one (Swedish) plane and an instruction sheet.Expexted availability during May2026
The AgustaWestland AW109, originally the Agusta A109, is a lightweight, twin-engine, eight-seat multi-purpose helicopter designed and initially produced by the Italian rotorcraft manufacturer Agusta. It was the first all-Italian helicopter to be mass-produced. Its production has been continued by Agusta's successor companies,formerly AgustaWestland, merged into the new Finmeccanica since 2016, presently Leonardo.
Hunter T.7 (RAF) Conversion Set
Two conversion sets (injection-moulded parts) are included, each containing 14 parts and one clear part (the cockpit canopy).
For modeller’s convenience a display base, made of pasteboard card, depicting tarmac section of the military airport is added.
A comprehensive instruction leaflet and a decal sheet are included.
Colour schemes included in the kit:
1) Hawker Hunter T Mk.7, XL620, No.66 Sq., RAF, Acklington Air Base, Northumberland, U.K., 1960
2A) Hawker Hunter T Mk.7, WV372/R, No.2 Sq., RAF (Royal Air Force Germany, RAFG), Gütersloh Air Base, West Germany, 1967-69
2B) Hawker Hunter T Mk.7, G-BXFI, painted as WV372/R of No.2 Sq., Fox-One Ltd., Kemble Air Base/Cotswold Airport, Gloucestershire, U.K., 2001-11
3) Hawker Hunter T Mk.7, XL619, White 77, No.45 Sq., RAF, Wittering Air Base, Cambridgeshire, U.K., acting as an umpire a/c during ‘Exercise Big Click 74ʼ, Leck Air Base, West Germany, August/September 1974
4) Hawker Hunter T Mk.7, XL612, ‘Raspberry Ripple’, Empire Test Pilotsʼ School (ETPS), Royal Aircraft Establishment (RAE), Boscombe Down Air Base, Wiltshire, U.K., 1970-2001
Mirage IV PE Parts
Photo-etched set with external details of Mirage IV for Miniwing 1/144 kit.
Key features:- ATAR 9K engine exhaust nozzles- undercarriage details & doors- antennas, probes & ECM pods- boarding ladders
Fret size:
0.1 mm: 66x45 mm
F-16 in service PL, SK, RO, UA
Decal sheets containing national insignia and/or tricolour stripes and/or serial numbers/letters in 1:144th scale. These decals are specifically designed for particular aircraft types and to match existing model kits.
One sheet of decals is included in this set.
Decals for the following aircraft are included:
- F-16C Fighting Falcon (LM-built), 4045, s/n 03-0045 (c/n JC-6, Block 52+), 3rd Tactical Sq., Polish Air Force, Poznań-Krzesiny Air Base, Poland, 2006-26
- F-16AM Fighting Falcon (GD-built), 1609, s/n 82-1022 (c/n 61-615, Block 20 MLU), 53rd Fighter Sq. ‘Warhawks’, Romanian Air Force, Fetești/Borcea (68th) Air Base, Romania, 2017-26
- F-16C Fighting Falcon (LM-built), 1005, s/n 20-4005 (c/n EX-5, Block 70), 1st Fighter Sq., Slovak Air Force, Malacky-Kuchyňa Air Base, Slovakia, 2025-26
- F-16AM Fighting Falcon (SABCA-built), UA80-3596, s/n 80-3596 (c/n 6F-31, Block 20 MLU), 107th Separate Aviation Wing, Ukrainian Air Force, different air bases, Ukraine, 2024-26
These decals were designed to be used with 1:144 Revell kits.
Tornado F.2/F.3 in RAF
Decal sheets containing national insignia and/or tricolour stripes and/or serial numbers/letters in 1:144th scale. These decals are specifically designed for particular aircraft types and to match existing model kits.
One sheet of decals is included in this set.
Decals for the following aircraft are included:
- Tornado F.2(T), ZD903/AB, No.229 Operational Conversion Unit, Royal Air Force, Coningsby Air Base, 1985-86
- Tornado F.3, ZE737/CE, No.5 Sq., Royal Air Force, Coningsby Air Base, 1989
- Tornado F.3, ZE809/EZ, No.23 Sq., Royal Air Force, Leeming Air Base, 1989
- Tornado F.3, ZE808/GF, No.43 Sq., Royal Air Force, Leuchars Air Base, 1990
- Tornado F.3, ZG731, No.41 Fast Jet and Weapons Operational Evaluation Unit, Royal Air Force (FJ&W OEU), Coningsby Air Base, 2008
These decals were designed to be used with 1:144 Revell and Dragon kits.
BAC 1-11-500 ‘Monarch, Debonair, Philippine Airlines’
This injection-moulded kit contains 51 parts. A comprehensive instruction leaflet and a decal sheet are included. The rear side of the box now comprises the representation of a tarmac section of the civil airport which can be cut out and used as a display base for the assembled model.
Colour schemes included in the kit:
1) British Aircraft Corporation BAC 1-11-500 (518FG), G-AXMG (c/n 201), Monarch Airlines Ltd., Birmingham, Gatwick, Luton and other various airports, U.K., 1984
2) British Aircraft Corporation BAC 1-11-500 (530FX), G-AYOP (c/n 233), Debonair Airways Ltd. (a/c leased from European Aviation Air Charter Ltd.), London Luton Airport, Bedfordshire, U.K., 1999
3) British Aircraft Corporation BAC 1-11-500 (501EX), RP-C1188 (c/n 209), ‘Super PAL Jet’, Philippine Airlines Inc. (PAL), Manila-Ninoy Aquino International Airport, the Philippines, 1977-90
Luftwaffe WWII Crosses (Balkenkreuz), late type – Black/White
Decal sheets containing national insignia and/or tricolour stripes, and/or serial numbers/letters and/or various symbols and inscriptions in 1:144th scale. Due to their generic nature they can also be used for other scales (1:72, 1:87, 1:100 etc.).
Two sheets of decals are included in this set.
Detailed product specification:
- insignia sizes: 600,800,850,900,950,1000 mm
scale sizes: 4.2;5.6;5.9;6.3;6.6;6.9 mm
Westland Wapiti Mk.IIA ‘RAF Service’
This full resin kit contains 134 parts, including 59 hardened black resin parts (undercarriage, struts and various details), vacform windshield (a spare set is included for modeller’s convenience) and a comprehensive decal sheet.
Colour schemes included in the kit:
1) Westland Wapiti Mk.IIA, K1291, No.27 Sq., Kohat airfield, India, 1936
2) Westland Wapiti Mk.IIA, J9403, No.30 Sq., Mosul airfield, Iraq, 1929
3) Westland Wapiti Mk.IIA, K1336, No.607 (County of Durham) Sq. (RAuxAF), Usworth airfield, Durham, U.K., 1935
4) Westland Wapiti Mk.IIA, J9388, No.31 Sq., Quetta airfield, India, 1931-32
5) Westland Wapiti Mk.IIA, K1342, No.601 (County of London) Sq. (RAuxAF), Hendon airfield, London, U.K., 1932
